Another Instructable in one week! This one is so easy, I’ll sum it up here:
Materials:
– A 1.5″ long 1/4-20 thumb screw
– Some 1/4-20 nuts
– Some 1/4 -1″ washers
– A 1/4-1.5″ washer
– A 1/4-1.5″ rubber washer
– A 1/4-20 cap nut
– A cheapo bike reflector
Tools:
– A drill with a 1/4″ drill bit
Cost:
– 3 or 4 bucks
Remove the reflector bit from the handlebar camp (it should unscrew) and drill the hole out to 1/4″. Assemble as per the image below.
Attach it to your handle bars. The cap nut holds the screw assembly together when not in use.
Rock and Roll.
Comments are closed.